LARP Shields

We welcome you to this page and hope you find interesting things here. First, we would like to inform you that we have revised our LARP shields and the new shields have been significantly upgraded in quality and appearance. Of course, each of our LARP shields on this site is unique. Even with the same appearance, the manual work makes it a one-off production in each step, which means that none of our products is produced in series or produced with molds, but has always been produced individually in meticulous manual work. The focus with our LARP shields lies in their many details and embellishments, for which the existing form offers a lot of space.

The pictured LARP weapons are example images of the respective weapon or shields. All of our LARP weapons are handmade and are therefore always slightly different, which makes each of our LARP weapons a unique piece. The weapon you get from us will, however, be very similar to the one pictured.

Cast elements, applications and soldering are used in addition to the usual methods.

Important Information

Our LARP weapons are reinforced with fabric and leather in all particularly stressed areas, sometimes several times. This not only serves the durability of our products, it is mainly intended to protect the players from injury. Here it is essential to note that our products are built only for combat simulation. We assume no liability for incorrect handling. Also, after purchase the owner of our products is responsible for checking this product for damage before each simulation. A defective product is not safe and therefore must not be used. Stabbing or beating on sensitive parts of the body is also not allowed with our products. Our products are not built to carry out violence in any form.

Important are the fun and the love of the hobby.

Many thanks,

the Silberwald Team



Der Silberwald



LARP Shields

Construction Data

For our LARP shield we use a plastic board as the core base. On this, the handle and arm straps are screwed. The core is then covered with foam from both sides. The foam used has the designation PZ 45. Latex is painted, spotted or sprayed depending on the area of the item to make forged, ground or other surfaces. This gives the surfaces a more realistic look. It does not look like it's just sprayed by a spray can. Afterwards, the shield gets its finish by sophisticated airbrush technique and finally a sealing.

Should one of the LARP shields stir your interest or you still have questions, please write us a short mail and you will receive from us all further information.

Yours, the Silberwald Team



Der Silberwald



LARP Shields

Round Shield - Celtic

The pictured LARP Shield is a customer order.

Recently we have introduced new surface structures and are happy to show them to you now. With a GRP rod that carries the handle and foam with the designation PZ 45, the skeleton is created. The rest is made of foam called PZ 45. All in all, this means that our new shields are very robust. Front and back get a tangible wood structure through elaborate latex work. On the back the wood tone can be adapted to the customer's request at any time and on the front the LARP shields are colored in the desired color, but still get the additional wood structure. With an elaborate treatment of the surface of the foam and the appropriate technique in latexing, the buckler gets a hammered metal appearance.

In addition, filigree rivets are also applied to these LARP shields. The rivets are cast completely from pre-colored silver latex. As a result, the rivet retains its color even when worn. Prior to sealing, the LARP shields are processed with our reinforced airbrush technique, which gives them the finishing touch. Here, too, the highlights and recessed areas are emphasized by airbrush.

The dimensions of the round shield are 80 cm in diameter.

The dimensions can be varied on request. Likewise the colors and motif.

If you are interested in this kind of LARP weapon, please contact us.

Round Shield - M.A.S.H.

The pictured LARP Shield is a customer order.

Recently we have introduced new surface structures and are happy to show them to you now. With a GRP rod that carries the handle and foam with the designation PZ 45, the skeleton is created. The rest is made of foam called PZ 45. All in all, this means that our new shields are very robust. On the back the wood tone can be adapted to the customer's request at any time and on the front the LARP shields are colored in the desired color.

The dimensions of the round shield are 70 cm in diameter.

The dimensions can be varied on request. Likewise the colors and motif.

If you are interested in this kind of LARP weapon, please contact us.

Round Shield - Whales

The pictured LARP Shield is a customer order.

Recently we have introduced new surface structures and are happy to show them to you now. With a GRP rod that carries the handle and foam with the designation PZ 45, the skeleton is created. The rest is made of foam called PZ 45. All in all, this means that our new shields are very robust. Front and back get a tangible wood structure through elaborate latex work. On the back the wood tone can be adapted to the customer's request at any time and on the front the LARP shields are colored in the desired color, but still get the additional wood structure. With an elaborate treatment of the surface of the foam and the appropriate technique in latexing, the buckler gets a hammered metal appearance.

In addition, filigree rivets are also applied to these LARP shields. The rivets are cast completely from pre-colored silver latex. As a result, the rivet retains its color even when worn. Prior to sealing, the LARP shields are processed with our reinforced airbrush technique, which gives them the finishing touch. Here, too, the highlights and recessed areas are emphasized by airbrush.

The dimensions of the round shield are 80 cm in diameter.

The dimensions can be varied on request. Likewise the colors and motif.

If you are interested in this kind of LARP weapon, please contact us.

Shield Adventurer

Recently we have introduced new types of shields and are happy to show them to you now. On a flexible plastic board, which is only as large as the handle and straps area, the handle and arm straps are screwed. The rest is made of foam called PZ 45. All in all, this means that our new shields are very robust. Front and back get a tangible wood structure through elaborate latex work. On the back the wood tone can be adapted to the customer's request at any time and on the front the LARP shields are colored in the desired color, but still get the additional wood structure. With an elaborate treatment of the surface of the foam and the appropriate technique in latexing, the edge of the shield and the other applications get a hammered metal appearance.

In addition, filigree rivets are also applied to these LARP shields. The rivets are cast completely from pre-colored silver or gold latex. As a result, the rivet retains its color even when worn. Prior to sealing, the LARP shields are processed with our reinforced airbrush technique, which gives them the finishing touch. Here, too, the highlights and recessed areas are emphasized by airbrush.

The dimensions of the shield are 90 cm in length and 55 cm in width.

The dimensions can be varied on request. Likewise the colors and motif.

If you are interested in this kind of LARP weapon, please contact us.

Round Shield Adventurer

The pictured LARP Shield is a customer order.

Recently we have introduced new types of shields and are happy to show them to you now. On a flexible plastic board, which is only as large as the handle and straps area, the handle and arm straps are screwed. The rest is made of foam called PZ 45. All in all, this means that our new shields are very robust. Front and back get a tangible wood structure through elaborate latex work. On the back the wood tone can be adapted to the customer's request at any time and on the front the LARP shields are colored in the desired color, but still get the additional wood structure. With an elaborate treatment of the surface of the foam and the appropriate technique in latexing, the buckler gets a hammered metal appearance.

In addition, filigree rivets are also applied to these LARP shields. The rivets are cast completely from pre-colored silver latex. As a result, the rivet retains its color even when worn. Prior to sealing, the LARP shields are processed with our reinforced airbrush technique, which gives them the finishing touch. Here, too, the highlights and recessed areas are emphasized by airbrush.

The dimensions of the round shield are 80 cm in diameter.

The dimensions can be varied on request. Likewise the colors and motif.

If you are interested in this kind of LARP weapon, please contact us.