LARP Bludgeoning Weapons

In the LARP Bludgeoning Weapons category you will find a number of foam weapons whose efficiency is due to the impact they make, which is why they are sometimes also called impact weapons. They are partly based on historical templates but also often involve strong fantasy aspects. Consequently, there is something for everyone.

The shown LARP weapons are above all example pictures of the respective weapon. All our LARP weapons are handmade and therefore are always slightly different. So each of our LARP weapons may be seen as a unique piece. The weapon you get from us is, however, very similar to the one pictured.

As with all our foam weapons, it is usually possible to make changes according to your wishes. If you are interested in one of the LARP weapons, please write a short mail and you will receive all further details from us. Please give us a few days to answer.

Important Information

Our LARP weapons are reinforced with fabric and leather in all particularly stressed areas, sometimes several times. This not only serves the durability of our products, it is mainly intended to protect the players from injury. Here it is essential to note that our products are built only for combat simulation. We assume no liability for incorrect handling. Also, after purchase the owner of our products is responsible for checking this product for damage before each simulation. A defective product is not safe and therefore must not be used. Stabbing or beating on sensitive parts of the body is also not allowed with our products. Our products are not built to carry out violence in any form.

Important are the fun and the love of the hobby.

Many thanks,

the Silberwald Team



Baudaten



LARP Bludgeoning Weapons

Construction Data

Either a 8x10mm rod is used for bludgeoning weapons up to 100cm, 12x10mm rod for bludgeoning weapons up to 150cm and for LARP bludgeoning weapons up to 200cm a 16mm rod is used, which minimizes swinging. At the ends of the rod, a foam cap is attached, so as to improve the security against penetration of the rod through the foam. The foam used has the designation PZ 45. Protruding areas of the foam weapon, which run the risk of tearing due to their shape and the resulting stress, are additionally provided with a strain relief. Depending on the model, reinforcement is also used against lateral twisting. Depending on the area of the foam weapon, latex is painted, dabbed or sprayed to imitate forged, polished or other surfaces, giving the weapons a more realistic look rather than the color of a spray can.

After that, the foam weapon gets its finish through sophisticated airbrushing technique which makes it look as if it were real weapons. Finally, they are sealed.

If you are enthusiastic about one of the LARP weapons or if you still have questions, please write us a short mail and you will receive all further information from us.

Yours, the Silberwald Team



Wuchtwaffen



Wooden Hammer

This LARP bludgeoning weapons impresses particularly by its slim form in the head and shaft and the detailed adornments on the wood and the metal bands. The head has soft foam incorporated behind the hitting surfaces, thus reducing impact. The foam on the clubface itself is firmer again, so durability is increased. The special look of old wood and jagged metal applications is achieved through elaborate latexing and airbrushing. Add to that the realistic-looking rivets and you’ll see the there is a lot of love for detail in this LARP weapon. The hammer belongs to the category LARP bludgeoning weapons.

Weapon length: 165 cm

Head mass: 30 x 14 x10 cm

If you are interested in this kind of LARP weapon, please contact us.

Shield Breaker

This LARP bludgeoning weapon impresses with its brute shape in the shaft and head. Because of safety, the head is made of softer foam and thus gives in well. The special look is achieved through the elaborate airbrush and the realistic-looking, fine soldering. This foam weapon is considered a two-handed weapon. It nevertheless belongs to the category LARP bludgeoning weapons.

 

 

If you are interested in this kind of LARP weapon, please contact us.

Schildbrecher mit Guss-Nieten

This LARP bludgeoning weapon impresses with its brute shape in the shaft and head. Because of safety, the head is made of softer foam and thus gives in well. The special look is achieved through the elaborate airbrush and the realistic-looking, fine soldering. This foam weapon is considered a two-handed weapon. It nevertheless belongs to the category LARP bludgeoning weapons.

 

 

If you are interested in this kind of LARP weapon, please contact us.