The Dark Side

On this page for the dark side you will find those LARP weapons made for players who neither want to play historically nor will or want to impersonate heroes of the light.

The pictured LARP weapons are example images of the respective weapon. Currently, these are all unique pieces of the first generation and as yet we cannot definitely say, which of these weapons will make it in our General catalogue. Anyway, all of our LARP weapons are handmade and are therefore always slightly different, which makes each of our LARP weapons a unique piece. The weapon you will get from us is, however, very similar to the one pictured.

As with almost all of our foam weapons, it is possible to make changes according to your wishes. If you are interested in of the LARP weapons, please write a short mail and you will receive all further details from us. Please give us a few days to answer.

Important Information

Our LARP weapons are reinforced with fabric and leather in all particularly stressed areas, sometimes several times. This not only serves the durability of our products, it is mainly intended to protect the players from injury. Here it is essential to note that our products are built only for combat simulation. We assume no liability for incorrect handling. Also, after purchase the owner of our products is responsible for checking this product for damage before each simulation. A defective product is not safe and therefore must not be used. Stabbing or beating on sensitive parts of the body is also not allowed with our products. Our products are not built to carry out violence in any form.

Important are the fun and the love of the hobby.

Many thanks,

the Silberwald Team

Der Silberwald

The Dark Side

Construction Data

We use 16mm round rods in our LARP weapons, which minimizes swinging. At the ends of the rod, a foam cap is attached, so as to improve the security against penetration of the rod through the foam. The foam used has the designation PZ 45.

Protruding areas of the foam weapon, which run the risk of tearing due to their shape and the resulting stress, are additionally provided with a strain relief. Depending on the model, reinforcement is also used against lateral twisting.

Depending on the area of the foam weapon, latex is painted, dabbed or sprayed to imitate forged, polished or other surfaces, giving the weapons a more realistic look rather than the color of a spray can. After that, the foam weapon gets its finish through sophisticated airbrushing technique which makes it look as if it were real weapons. Finally, they are sealed.

If you are enthusiastic about one of the LARP weapons or if you still have questions, please write us a short mail and you will receive all further information from us.

Der Silberwald

 

Skull Axe

 

This larp weapon belongs to the series of axes and into the category dark side. The skull is foamed and thus yielding in its shape. Due to the latex and the detailed airbrush, the skull looks like an old relic. The axe blade is reinforced against twisting and tearing with inlaid leather at two important stress points and also reinforced by a newly introduced fabric strap which absorbs the tensile load. Through elaborate craftsmanship, the blade gets a real hammered metal look and a grinded look on the cutting edge. Sophisticated airbrush technique and cast applications completes the picture.

All LARP weapons from the category LARP axes can also be built on request in desired lengths. The maximum length, however, is 2.00 m.

If you are interested in this LARP list weapon, please contact us.

Skull Scythe

This larp weapon belongs to the series of pole arms and into the category dark side. The skull is foamed and thus yielding in its shape. Due to the latex and the detailed airbrush, the skull looks like an old relic. The sickle is reinforced with special fabric on the underside. The middle part is decorated with a band appearing like metal and fitting latex applications.

If you are interested in this LARP list weapon, please contact us.

Skull Hammer I

 

 

This larp weapon belongs to the series of bludgeoning weapons and into the category dark side. The skull is foamed and thus yielding in its shape. Due to the latex and the detailed airbrush, the skull looks like an old relic. On this weapon, especially the three dimensional parts appearing like steel with a hammered look stand out. A whole load of small details and cast latex applications complete the picture of a brutal bludgeoning weapon.

If you are interested in this LARP list weapon, please contact us.

Skull Spear

This larp weapon belongs to the series of pole arms and into the category dark side. The skull is foamed and thus yielding in its shape. Due to the latex and the detailed airbrush, the skull looks like an old relic. A band appearing like metal and fitting latex applications and thorns complete the picture. The tip is reinforced with special fabric. A 16mm rod is used for extra stability.

If you are interested in this LARP list weapon, please contact us.

Shield Breaker with Skull Rivets

 

This larp weapon belongs to the series of bludgeoning weapons and into the category dark side. This LARP bludgeoning weapon impresses with its brute shape in the shaft and head. Because of safety, the head is made of softer foam and thus gives in well. The special look is achieved through the elaborate airbrush and the realistic-looking, fine soldering and cast latex applications. This foam weapon is considered a two-handed weapon and falls into the bludgeoning weapons category.

If you are interested in this LARP list weapon, please contact us.

 

Twin Axe Thorn

This larp weapon belongs to the series of axes and into the category dark side. The skull is foamed and thus yielding in its shape. Due to the latex and the detailed airbrush, the skull looks like an old relic. The axe blade is reinforced against twisting and tearing with inlaid leather at two important stress points and also reinforced by a newly introduced fabric strap which absorbs the tensile load. Through elaborate craftsmanship, the blade gets a real hammered metal look and a grinded look on the cutting edge. Sophisticated airbrush technique and cast applications completes the picture.

All LARP weapons from the category LARP axes can also be built on request in desired lengths. The maximum length, however, is 2.00 m.

 

If you are interested in this LARP list weapon, please contact us.